Complete plywood manufacturing line

Machinery and Equipment List

I. Log Cutting and Veneer Peeling Section

1. Log Cross-Cutting Machine, comprising log infeed conveyor belts, log feeder, cutting head and conveyor belts for transporting logs to the lathes.
2. Lathe No. 1, 1,400 mm, model TRHS, equipped with an automatic loader, conveyor belt and Jusan CR3 single-table guillotine shear.
3. Lathe No. 2, 1,400 mm, model TRH4, two-section telescopic design, equipped with a conveyor belt and Jusan CR2 single-table guillotine shear.
4. Lathe No. 3, 1,200 mm, model TRH4, single-section telescopic design, equipped with a Jusan conveyor belt.
5. Waste Removal System, comprising:
   • Conveyor belt for transporting waste from the lathes to the wood chipper.
   • Wood chipper.
   • Conveyor belt for transporting wood chips from the chipper to the scraper conveyor.
6. Sharpening Machine, 1,500 mm, equipped with a magnetic chuck.

II. Veneer Drying Section

7. Double-Deck Veneer Dryer, Sugimat, 4.00 m wide, with mesh conveyor system and automatic veneer feeder, comprising 6 sections.
8. Double-Deck Veneer Dryer, Sugimat, 4.00 m wide, with mesh conveyor system and automatic veneer feeder, comprising 7 sections.

III. Panel Lay-Up and Pressing Section

9. Presses Nos. 1 and 2, each with 11 platens and 10 openings.
10. Press No. 3, Cortázar, with 9 platens and 8 openings.
11. Press No. 4, Cortázar, with 9 platens and 8 openings.
12. Two Glue Spreaders.
13. Mixing Unit.

IV. Panel Cutting Section

Cutting Line No. 1

14. Panel Cross-Cutting Machine, Mello.
15. Sanding Machine, March, single-belt configuration.
16. Five-Head End Trimming Machine, Mello, equipped with a waste discharge conveyor belt.

Cutting Line No. 2

17. Panel Cross-Cutting Machine, Mello.
18. Profiling Machine.
19. Sanding Machine, Viet, three-belt configuration.

5. Boiler Section

20. Boiler with a Thermal Capacity of 4 Million Kilocalories, equipped with an automatic wood-chip feeding system, scraper conveyor, conveyor belts leading to the hopper and screw conveyor for feeding wood chips into the boiler.

6. Others

1. Two Atlas Copco Air Compressors